If you don’t clean a vacuum cleaner, it will become inefficient and begin to overheat very fast
When it comes to cleaning your house, your vacuum cleaner is one of the most efficient tools you have at your disposal. Asides from removing dirt, dust, hair, and find tiny objects, it enhances and improves the look of your homewares. But these vacuum cleaners are not capable of maintaining themselves, as oftentimes their efficiency begins to decrease over time because of sucking up dirt, crumbs, dog hair, and occasionally hair tie resulting in blockages.
So if your vacuum is not working as it should be, don’t worry, we have got you covered. You may need to clean a vacuum cleaner when needed. That’s why in this article I will show you how to clean a vacuum cleaner so it can suck up dirt and dust like a new one.
EQUIPMENT YOU WILL NEED WHEN YOU CLEAN A VACUUM CLEANER
- Microfiber cloth: this is made from synthetic fiber and is the perfect option for cleaning parts that cannot come in contact with moisture since they can trap dust in the fibers.
- Toothbrush: this comes handy in places where it is hard to reach and there is a need to clean them, using a brush will make it easier to build up places.
- Dish soap: this is required because you will need soapy water to clean off parts (plastic parts) of the vacuum cleaner and regular dish soap is excellent for this job. Though everything needs to be thoroughly dried before reassembling the vacuum to avoid dangers of electric shock.
- Scissors: a pair of scissors is needed to remove hairs lurked between the rolling brush of your vacuum cleaner.
- Compressed Air Can: this is excellent for tight areas where you can’t reach with even a brush. This compressed air can is sometimes used in cleaning computer hardware and other electronics.
Other items you might need include: A screwdriver set and wire hanger.
HOW TO CLEAN A VACUUM
Before you start cleaning your vacuum machine, make sure it unplugged from any power source throughout the cleaning process.
- Clean the hose and its gallery thoroughly: one the factors that lead to low efficiency of your vacuum cleaner is a hose that is clogged with dirt, especially where the housing unit and the hose itself joins. So you detach the hose completely from the housing unit and then use your wire hanger to remove particles that could have been clogged there.
Then proceed to clean your hose by bunching it up so that it gives you a short length and then use a long object to push from one end to the other so as to remove clogs. You can take it further by washing with soapy water and let it hang dry before reassembling.
- Dismantle The Main Components And Soak the Washable Parts
You dismantle the main components by using a screw driver set and then remove the washable pieces which usually include the motor filters, the dust bin, cyclone piece that is at the top of the dust bin with all other accessories and attachments.
So for pars that are made of plastics to soak them in soapy water and wash them while the metal parts wipe them with a damped microfiber cloth and put them in a place to dry.
- Wash Your Filter: basically you are to replace most filters in every three to six months but some filters are very washable (you can check your manual to confirm that) although you will need to replace them when they wear out especially when it can’t separate air from dust. You clean your filter by placing it under running warm water until it is neat and then set it aside to let dry.
- Remove excess dust from the inside of the vacuum using the compressed air can to remove dusts from the tight areas of the vacuum.
- Clean the roller brush: as you have dismantled the whole components, it will be easier for you to clean the roller, use a scissor to remove hairs that are trapped in between the roller brush. While this is still going on you can plug in your vacuum to a power source for you to remove dust in the passageways.
When everything is clean and properly dried, reassemble the vacuum and then enjoy. The steps above are very simple and easy to follow through, if you can achieve this then your vacuum will start sucking again like a new one.
Check out some of the best steam cleaners here!